Please select Into the mobile phone version | Continue to access the computer ver.
Close
You need to log in before you can reply       Login | Register now

[Android] Waypoint mission more than 10 waypoints

Author: Michael16 2017-8-21 21:34
4 126
Last edited by Michael16 In 2017-8-21 21:38 Editor

My setup:
Phantom 4 firmware version: V02.00.0106 (from DJI Assistant 2)
Flight controller firmware: 3.2.35.06
Remote Controller version 1.9.2
SDK version: 4.2.1

If I try execute a waypoint mission with more than 10 waypoints I get a "mission could not be executed" error message. Less than 10 waypoints it works perfectly.

I have only noticed this issue since upgrading to P4 firmware version V02.00.0106

This is very inconvient. Please help.

Thanks
Mike





Reply
Replies
Sergey3
Hello. I had same problame. Take your app more time for download mission to drone. For this set WaypointMissionOperatorListener. And in
@Override
            public void onUploadUpdate(@NonNull WaypointMissionUploadEvent waypointMissionUploadEvent) {
                missionActivity.runOnUiThread(new Runnable() {
                    @Override
                    public void run() {
                        if (waypointMissionOperator.getCurrentState().equals(WaypointMissionState.READY_TO_EXECUTE)) {
                            onMissionReadyToStart();
                        }
                    }
                });
            }
2017-8-22 16:40
Michael16
Last edited by Michael16 In 2017-8-22 19:31 Editor
Sergey3 Posted at 2017-8-22 16:40
Hello. I had same problame. Take your app more time for download mission to drone. For this set Wayp ...

Hi Sergey

Thanks so much for the reply. I will try that

On a side note I found a workaround where I added my waypoint mission as an element in a timeline mission. This worked but is obviously not a very efficient method.
2017-8-22 18:50
Michael16
Michael16 Posted at 2017-8-22 18:50
Hi Sergey

Thanks so much for the reply. I will try that

Great, that fixed it. Thanks for the help
2017-8-22 19:55
ydding
Upload need time, so this error may caused by upload incomplete.
2017-8-22 19:57
You need to log in before you can reply Login | Register now

Quick Reply Back to top Back to list
Quick Reply Back to top Back to list