Please select Into the mobile phone version | Continue to access the computer ver.
Close
You need to log in before you can reply       Login | Register now

[Bug] MFIO (Multi function IO) questions

Author: KopterKraft 2017-6-28 05:05
1 136
There seem to be some discrepancies between the documentation (https://developer.dji.com/onboar ... ti-function-io.html) and implementation.

Documentation says:
  • F1-F4 can be configured to be Input pins
  • F5-F8 can be configured to be Input or Output pins

I tested the sample and this uses F4 (channel3) as PWM output pin so I assume, that all eight F-ports can be used as PWM out?

Documentation illustrates that the middle row of pins (marked with a red box) are "voltage pins". To me it looks like they have no voltage.


Reply
Replies
KopterKraft
...and another question: which load (current in mA) can the output pins deliver?
2017-7-2 03:20
You need to log in before you can reply Login | Register now

Quick Reply Back to top Back to list
Quick Reply Back to top Back to list