Please select Into the mobile phone version | Continue to access the computer ver.
Close
You need to log in before you can reply       Login | Register now

[Help] M100 Activation failed

Author: Z、eRO 2017-5-19 11:13
3 262
After clicking the activation button,There will be an error message "Please call getDroneVersion first".My ID and KEY have been entered, com5 has also been opened.Version button does not respond after pressing.MY phone is also connected to the DJI GO.Why can not it be activated?
Reply
Replies
isuran
Which operating system are you using. Under Ubuntu, you should check port permission(chmod 666 /dev/ttyUSB0), this error is usually when connection to uart port on drone(not usb)
2017-5-19 15:50
Z、eRO
isuran Posted at 2017-5-19 15:50
Which operating system are you using. Under Ubuntu, you should check port permission(chmod 666 /dev/ ...

win7 .I do not understand what you said. I use the uart port, but this error message always appears. The port permission is no problem.
2017-5-20 11:24
ChrisJagielski
Is the baudrate correct? Do you have internet access? (I'm not sure if that's necessary, just trying to help).

Good luck!
2017-5-23 23:46
You need to log in before you can reply Login | Register now

Quick Reply Back to top Back to list
Quick Reply Back to top Back to list