Please select Into the mobile phone version | Continue to access the computer ver.
Close
You need to log in before you can reply       Login | Register now

[Discussion] Guidance on DIY Mode

Author: clearskiesph 2016-4-7 04:09
0 3903
Hi Guys,

I hope you are doing ok. I have two questions:

1. if I set the guidance to DIY mode and plug it to the M100 via the canbus will the obstacle sensing on DJI Go app still work?
2. if I calibrated the guidance first on M100 mode then switch it to DIY mode, do I need to recalibrate again the Guidance?

Also, i think it would be nice also if DJI could integrate the Guidance (at least the distance output of each sensor) sensor data on Mobile & onboard SDK's

Thanks for your response.

Reply
Replies
You need to log in before you can reply Login | Register now

Quick Reply Back to top Back to list
Quick Reply Back to top Back to list