Please select Into the mobile phone version | Continue to access the computer ver.
Close
You need to log in before you can reply       Login | Register now

[Help] Guidance drivers on Linux.

Author: lea 2015-10-19 17:14
2 4226
Last edited by lea In 2015-10-19 17:14 Editor

Hi everyone !

I'm actualy trying to make the examples from the Guidance sdk work on Ubuntu 14.04 but when I launch the code I get some kind of error I do not understand :

➜  ./guidance_example
➜ llibusb_get_device_list ret = 7 !!!
➜ Waiting for board ready...
➜ Error: 8 at 152,main.cpp

I checked if the Guidance was connected to the computer and it was. I think maybe I get this error because the Guidance drivers aren't or were poorly installed.

My questions are :
- Why do I get this error ?
- How can I correctly install the Guidance drivers on a Linux distribution ?

Thank you for all.

Reply
Replies
DJI-Sinsasion
This error is thrown when SDK tries to obtan camera calibration parameters but fail. It is usually due to the incorrect driver. Please download the source code of libusb-1.0.9, compile and install it. Installing from apt-get seems not working.
2015-10-21 15:05
ycp007
DJI-Sinsasion Posted at 2015-10-21 15:05
This error is thrown when SDK tries to obtan camera calibration parameters but fail. It is usually d ...

I  have same problem. I have downloaded the source code of libusb-1.0.9, compiled and installed it,but I'm not sure if the USB driver is properly installed。how can I do it?
2015-12-8 21:38
You need to log in before you can reply Login | Register now

Quick Reply Back to top Back to list
Quick Reply Back to top Back to list